Planting season has rolled on this year with large planting progress made in short time! I’m grateful for the general warming trend with no cold snaps unlike so many recent years. Like many of you, am also praying for rain. For pre- herbicides, it is important to have 0.5-0.75” of moisture within a week of applying them for activation. That was a topic of concern I was hearing from both growers and ag industry last week, thus why it was recommended that some start pivots. I’m starting to see grass and broadleaf weeds coming through on ground that didn’t receive moisture to get the herbicide activated. Corn and soybean are also emerging fairly quickly with these warmer temps. The latest in pheromone trapping cutworm counts across the State can be found at: https://go.unl.edu/jdd3.
Some have asked about interseeding covers into early vegetative corn or soybean. Perhaps the three biggest things we’ve learned are to make sure the seed is in the ground vs. broadcast, plan to seed between V2-V5, and think about your herbicide program before trying this. An easy to understand site for herbicide impacts to covers is at: http://interseedingcovers.com/herbicide-options/. That whole website holds good information. There’s an Upper Big Blue NRD soil health project with partners of The Nature Conservancy, NRCS, and Extension where we will have 6 on-farm research studies and several other demos of interseeding this year. Growers are looking at impacts of different mixes, corn populations, row direction, and number of rows interseeded (1 vs. 3) between the corn rows. Looking forward to these additional studies to add to the research base which we talked about in this CropWatch article last year: https://go.unl.edu/4nh7.
My prayers go out to livestock and poultry producers; I just can’t imagine. There are a number of resources at https://animalscience.unl.edu/swine for emergency depopulation of livestock facilities. Such a hard time all around in ag. Free farm finance and legal clinics for May can be found at: https://go.unl.edu/joos. Nebraska Farm Hotline/Rural Response Hotline: 800-464-0258.
Evergreen Tree Diseases: The wet springs the past several years have led to an increase of needle blights. Spring is the time to be spraying trees with preventive fungicides with timing depending on the disease. None of the options I list are exhaustive and not meant as endorsement. For windbreak situations of cedars and pines, some ag retailers have carried Tenn-Cop 5E or Camelot. For home-owner use for trees in landscapes, I will share what I’ve seen sold in our local stores. It’s important to read the product label to ensure it’s safe to use on the specific plant/tree you wish to treat as some copper products can harm plants. In Austrian and Ponderosa pines, tip blight (where tips die) and dothistroma needle blight (where needles turn brown and die) can be prevented with fungicide applications. Tip blight is best prevented in late April-early May with active ingredients of Propiconazole (found in Fertiloam liquid systemic fungicide), Copper Salts of Fatty & Rosin Acids (sometimes listed as copper soap such as Bonide liquid copper fungicide and other liquid copper formulations), or Bordeaux mixture. Dothistroma needle blight can be prevented in mid-May and a second application in mid-June with Copper salts of fatty and rosin acids and Bordeaux mixture. In spruces, needle cast can cause the yellow to reddish brown color of needles in the fall that remain that way in the spring. Fungicide should be applied when the new growth is half grown with a second application 3-4 weeks later. If your tree is severely infected, it may take applications like this for 2-3 years in a row. Chlorothalonil (found in Daconil and Fung-onil) is commonly recommended. Fungicides containing azoxystrobin, mancozeb, propiconazole, copper salts of fatty acids, and copper hydroxide are also effective at controlling this disease if the product is labeled for use on spruce. You can learn more about evergreen diseases, how to identify them, and more products for management at: https://go.unl.edu/rbcc.
It’s too early for bagworm control. I’ll share more on what to look for next week.
Happy Easter! This will truly be one to remember and hope you were able to still connect with family and friends in some way. For fruit trees and freeze temp. thresholds, please check out this resource: https://www.canr.msu.edu/uploads/files/PictureTableofFruitFreezeDamageThresholds.pdf. With planting having started for some or anticipated in the next few weeks, wanted to share some things I’ve been thinking about and some questions I’ve received.
As much as we have more physical distance in ag, it may be wise to have some plans in place in the event someone becomes sick with COVID-19 in your crop or livestock operation. Things such as disinfecting equipment and a sample 0-2 month plan with contact phone numbers are available in this week’s CropWatch at cropwatch.unl.edu. There’s also information on the CARES Act explaining the numbers. A series of Farm/Ranch COVID-19 free economic webinars are upcoming from UNL AgEcon. The first is this Thurs. April 16th at 3 p.m. CST. and features Nathan Kauffman, with the Federal Reserve Bank of Kansas City, presenting on COVID-19 Economic Developments and U.S. Agriculture. Details and recordings will be posted at https://go.unl.edu/manage2020.
Planting Considerations: It was nice to see equipment out in fields this past week! With tight economics, it’s important to make wise decisions with the factors we can control during planting season; it sets the stage for the rest of the year. One factor to consider is planting windows instead of planting dates. While this week is mid-April, it may not provide the best opportunities for planting. Be sure to check soil temps and plant at proper depth, not mudding in seed, and plant as close to 50F soil temps as possible when there’s a warming trend. Avoid planting when there’s potential for a cold rain/cold snap within 48 hours for corn and at least 24 hours for soybean. It’s also best to get seed in the ground 1.5-2” deep. For corn, this is critical in helping with nodal root establishment. For soybean, this aids in buffered soil moisture and temperature and helps delay emergence to aid against potential frost. Numerous research studies have proven the yield benefit to early planted soybean. Outside of the genetics, it’s the top way to improve soybean yields. When we conducted these studies via on-farm research, we also had planting date X planting rate studies. Those studies showed no yield difference when planting 120K vs. 180K in April vs. May beans. All the planting date studies had an insecticide + fungicide seed treatment and I have no data without it. Our soybean planting rate studies did not always have a seed treatment and now 13 years of that data still shows 90-120K planted seeds being the most economical while 120K is what we’d recommend for yield.
In this week’s CropWatch, I wrote an article with Jim Specht on soybean germination. The imbibition phase (water uptake) is the critical phase for potential seed chilling. Once the imbibition phase is complete, the soybean going through the osmotic phase can tolerate 35-40F soil temps as long as soil is not saturated. The reason why we say at least 24 hours for soybean vs. 48 hours for corn (regarding cold snap/cold rain) is because the soybean seed imbibes water much faster than corn. You can prove this to yourself! Put a soybean seed and corn seed in water and watch what happens. When teaching youth ag literacy, I put soybean seeds in water to show them the seed coat, root and first leaves. Granted, we’re not planting soybean into water, but it helps one see the difference in how the seeds imbibe water. Studies from journal articles showed the imbibition phase could complete in as little as 8-12 hours. However, it all depends on the beginning soil moisture, soil temperature, quality of the seed (no nicks in the seed coat, free of wrinkles from wet/dry cycles, higher seed moisture of 13-16%). There have also been experiments to suggest that soybean can be planted in 45F soil temps if soil moisture is stable and no cold rains occur during the imbibition period.
I’ve also received a few questions regarding rye rapidly growing and what to do. I have no research-only observation and talking to others. I’m still a fan of planting green. However, have noticed difficulty with residual herbicides applied to tall rye (above 12”) and getting down to the soil, thus weed escapes. So, a few thoughts. If you’re concerned about the rye, you can always terminate a few weeks before planting. Otherwise, consider splitting your residual with half on when you kill rye after planting with other half later or putting on your residual in a second pass after killing rye. Would welcome others’ thoughts/experiences of what’s working for you!
Dicamba Webinar: The National Ag Law Center is hosting a free webinar titled ‘The Deal with Dicamba: An Overview of Dicamba-Related Litigation’ on April 15th at 11 a.m. CST. It will discuss various lawsuits filed in response to crop damage allegedly caused by herbicides containing dicamba. Details: https://bit.ly/3e2LvGX.